ANZIAM J. 47(EMAC2005) pp.C355--C372, 2006.

Uncovering the secrets to relieving stress: discrete element analysis of force chains in particulate media

Maya Muthuswamy

John Peters

Antoinette Tordesillas
(Received 8 November 2005; revised 24 August 2006)

Abstract

The traditional analyses for structures that are either built upon (for example, foundations), or are used for storage and handling of particulate solids (for example, bins, silos, hoppers, and bunkers) cannot account for important processes originating in the evolution of microscale particle kinematics and kinetics. Until recently, the complexity of these processes could only be perceived through macroscale experiments, but information derived from these experiments lacks the necessary level of detail that is needed for sound theoretical development. Limited information on the evolution of microstructural properties in deforming particulate solids emerged through ingenious experiments using photoelastic techniques. These techniques revealed the complex microstructural fabric and force propagation, the evolution of which governs what is observed as the constitutive response of the material. More recently, numerical simulations using the discrete element method have also proven to be powerful tools --- effectively providing a virtual laboratory for studying microstructural evolution. We use the discrete element technique to examine the propagation of forces within a particulate solid that is subject to an indenting rigid flat punch on its surface. Particular attention is given to the formation, evolution and collapse of ``force chains'' (that is, quasi-linear chains of load-bearing particles). These force chains are surrounded by a weak network of particles that, despite carrying only a small amount of the load, provides the necessary stability for such chains to persist. A mathematical framework for the characterisation of these chains is used to investigate the evolution of the force chain network with indentation, with a focus on microstructure, force chain lengths, and length distributions. Finally, the first steps toward establishing correlations across multiple length scales are made by linking the macroscopic load-penetration response to the underlying evolution of contact forces and force chains.

Download to your computer

Authors

Maya Muthuswamy
Department of Mathematics and Statistics, University of Melbourne, 3010, Australia. mailto:mayadm@ms.unimelb.edu.au
John Peters
U. S. Army Corps of Engineers, Engineer Research and Development Center, Vicksburg, U. S. A.
Antoinette Tordesillas
Corresponding author: Department of Mathematics and Statistics, University of Melbourne 3010, Australia. mailto:atordesi@ms.unimelb.edu.au

Published October 7, 2006. ISSN 1446-8735

References

  1. J. T. Bosko and A. Tordesillas. Unjamming transitions in dense granular assemblies subjected to biaxial compression. Phys. Rev. E, submitted.
  2. H. S. Hafez. 600-311 research report: A discrete element simulation of a 2{D} assembly of bi-disperse circular disks subjected to pure shear. Technical report, The University of Melbourne, 2005.
  3. R. R. Hartley. Evolving force networks in deforming granular materials. PhD thesis, Duke University, 2003.
  4. D. A. Horner, J. F. Peters, and A. Carrillo. Large scale discrete element modeling of vehicle-soil interaction. J. Eng. Mech.-ASCE, 127(10):1027--1032, 2001. doi:10.1061/(ASCE)0733-9399(2001)127:10(1027)
  5. D. Howell, R. P. Behringer, and C. Veje. Stress fluctuations in a 2D granular couette experiment: A continuous transition. Phys. Rev. Lett., 82(26):5241--5244, 1999. doi:10.1103/PhysRevLett.82.5241
  6. S. Luding. Stress distribution in static two-dimensional granular model media in the absence of friction. Phys. Rev. E, 55(4):4720--4729, 1997. doi:10.1103/PhysRevE.55.4720
  7. T. S. Majmudar and R. P. Behringer. Contact force measurements and stress-induced anisotropy in granular materials. Nature, 435(7045):1079--1082, 2005. doi:10.1038/nature03805
  8. H. A. Makse, D. L. Johnson, and L. M. Schwartz. Packing of compressible granular materials. Phys. Rev. Lett., 84(18):4160--4163, 2000. doi:10.1103/PhysRevLett.84.4160
  9. H.-B Muhlhaus and I. Vardoulakis. The thickness of shear bands in granular material. Geotechnique, 37(3):271--283, 1987.
  10. M. Muthuswamy and A. Tordesillas. Micro-level validation of discrete element simulations with experiments: a focus on force propagation, 2006. Poster presentation at Fifth World Congress on Particle Technology.
  11. M. Muthuswamy and A. Tordesillas. How do interparticle contact friction, packing density and degree of polydispersity affect force propagation in particulate assemblies? J. Stat. Mech. Theory Exp., P09003, 2006. doi:10.1088/1742-5468/2006/09/P09003
  12. N. Olshina. 620-312 research project: Contact forces in 2{D} bidisperse assembly of circular disks subject to isotropic compression: A {DEM} investigation. Technical report, The University of Melbourne, 2005.
  13. J. F. Peters, M. Muthuswamy, J. Wibowo, and A. Tordesillas. Characterization of force chains in granular material. Phys. Rev. E, 72(4):041307, 2005. doi:10.1103/PhysRevE.72.041307
  14. F. Radjai, D. E. Wolf, M. Jean, and J. J. Moreau. Bimodal character of stress transmission in granular packings. Phys. Rev. Lett., 80(1):61--64, 1998. doi:10.1103/PhysRevLett.80.61
  15. S. Schollmann. Simulation of a two-dimensional shear cell. Phys. Rev. E, 59(1):889--899, 1999. doi:10.1103/PhysRevE.59.889
  16. A. Tordesillas, J. F. Peters, and B. S. Gardiner. Insights into 1D localisation theory and micromechanical constitutive laws. Geotechnique, 54(5):327--330, 2004. doi:10.1680/geot.54.5.327.46727
Copyright Austral. Mathematical Soc.; prepared October 7, 2006, from Muthuswamy.tex with anziamje.sty (v2.4)